Check tire condition

To check your tire condition, you should inspect the tread depth, look for damage, and ensure proper inflation. You can use the "penny test" to assess tread depth, check for cuts, bulges, or uneven wear, and use a tire pressure gauge to verify proper inflation.
Detailed Steps:

1. Check Tread Depth:

• Penny Test: Insert a penny into the tire's tread groove with Lincoln's head upside down. If you can see the top of Lincoln's head, the tread is likely worn down and should be replaced.
• Tread Wear Indicators: Some tires have molded bars (wear indicators) in the grooves that indicate the minimum legal tread depth. If these bars are flush with the tread, it's time to replace the tires
• Visual Inspection: Look for any visible signs of uneven wear, cuts, or bulges on the tire's tread. 

2. Check for Damage:

• Inspect the sidewalls for cracks, bulges, or cuts.
• Look for any objects lodged in the tread, such as nails, stones, or thumbtacks.
• Check for any unusual lumps or bulges, which could indicate internal damage.

3. Check Tire Pressure:

• Use a tire pressure gauge to measure the pressure in each tire.
• Ensure the tires are properly inflated to the recommended pressure, which can be found on the tire placard or in your vehicle's owner's manual.
• Check tire pressure when the tires are cold, meaning they haven't been driven for at least 3 hours or before driving 1 mile.